- Created: 07-02-17
- Last Login: 16-10-20
Description: CCR1036-12G-4S is an industrial grade router with cutting edge 36 core CPU. If you need many millions of packets per second - Cloud Core Router with 36 cores is your best choice. The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, a serial console cable and a USB port. Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) Product code: CCR1036-12G-4S CPU nominal frequency: 1.2 GHz SFP DDMI: Yes CPU core count: 36 Size of RAM: 4 GB Architecture: TILE 10/100/1000 Ethernet ports: 12 Number of USB ports: 1 Power Jack: 1 AC input range: 100-240VAC Voltage Monitor: Yes CPU temperature monitor: Yes PCB temperature monitor: Yes Dimensions: 355x145x44mm Operating System: RouterOS v6 (64bit) Tested ambient temperature: -20C .. +60C License: level 6 Current Monitor: Yes CPU: TLR4-03680CG-12CE-A3b Max Power consumption: 69W SFP ports: 4 USB slot type: microUSB type AB Serial port: RS232 Storage type: NAND Storage size: 1 GB
Publish Date: 01-05-20
Description: The RB411GL is created for high-end wireless AP, Point-to-Point or CPE OEM applications. It has Gigabit Ethernet port, so you can take full advantage of 802.11n standard. Unit has one miniPCI slot for your choice of miniPCI wireless card, powerful Atheros 680MHz CPU, 64MB of RAM and a USB port for 3G or storage.
Publish Date: 30-10-19
Description: RouterBOARD 953GS-5HnT-RP is our first product with 5GHz 3x3 MIMO Triple Chain support. It has a powerful Atheros QCA9558 CPU 802.11a/n wireless support with three RPSMA connectors. RB953GS-5HnT is equipped with a new Scorpion 720Mhz CPU, 128MB RAM and three Gigabit Ethernet ports, to take advantage of high-speed 3x3 MIMO wireless. Moreover, it comes with two SFP cages to accommodate FTTH and fiber ring requirements. Handy additions are two miniPCI-express slots and two SIM slots, for multiple 3G/4G connections or wireless expansion. Unit comes with preinstalled RouterOS Level5 license.
Publish Date: 30-10-19
Description: The CSS106-1G-4P-1S ( formerly the RB260GSP ) is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The CSS106-1G-4P-1S has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products - SwOS.
Publish Date: 23-10-19
Description: Price is for each card. ESD cable is not included. WLM200N5-26-ESD MiniPCI wireless network adapter provides up to 400mW output power with electrostatic discharged (ESD) protection. WLM200N5-26dBm is the MiniPCI radio card choice for long distance links combined with excellent receiver sensitivity where signal levels are reduced due to minor obstructions such as trees or building. Addition of Compex WLM11n series MiniPCI wireless network adapter to your device, will greatly improve the network performance and achieve higher efficiency of day-to-day activities such as File Transfers, Internet Browsing, and Media Streaming. WLM200N5-26dBm is the MiniPCI radio card choice for long distance links combined with excellent receiver sensitivity where signal levels are reduced due to minor obstructions such as trees or building. It is configured with Atheros chipset, so it is easy to use with all draft IEEE 802.11n compatible WLANs. It is ideally suitable to integrate a wide range of OEM devices. Built on Atheros chipset 9220, it can be used with all draft IEEE 802.11n compatible WLANs, and is ideally suited to be integrated into a wide range of OEM devices. Features: 5GHz IEEE 802.11a standard Draft 2.0 Output Power of up to 26dBm (400mW) per chain/ 28dBm aggregate Support for up to 2x2 MIMO with spatial multiplexing Built-in ESD Protection with ESD/EMP Immunity Threshold: 15KeV Four times the throughput of 802.11a Transmission Power Control (TPC) Enhanced performance with Atheros XSPAN technology Optimized for higher throughput at long range High Performance (up to 300Mbps physical data rates and about 200Mbps of actual throughput) with Low Power Consumption Dynamic Frequency Selection (DFS) Multi-Country Roaming Support (IEEE802.11d) 2 X MMCX Antenna Connector suport MRC (Maximum ratio combined) technology Suitable for Embedded System or OEM Project Affordable and Ideal for a variety of applications Complete datasheet please see here. DRIVER INFORMATION DRIVER Linux, Windows XP, Windows 2000, Windows Vista,Mikrotik OS 4 supported !! 11n standard uses OFDM modulation and is therefore perfectly legal to operate these facilities under the general authority as 11a/b/g. The speed at which the devices communicate determine the so-called modulation schemes and code MSC. These are defined total 31st MSC 0-7 uses one antenna to transmit and receive (so-called single stream) It is possible to have a standard width of 20 MHz channel, but for higher speed is selected to be 40 MHz. MSC7 theoretical maximum speed of 150 Mbps and is used only one antenna. Real rates are above 70 Mbps, but we'll see how it will be in our other tests. MSC 8-15 adds MIMO (Multile Input Multiple Output), it is the use of multiple antennas on both sides. These schemes specifically 2 antennas (known as MIMO 2x2). Not so that one antenna transmits and one receives, but always send and receive both antennas. Is used here to increase the speed of phase shifts (very simply say). These schemes used innovations products such as MIMO Junior, MIMO Station, Wodasign 11N router and a theoretical maximum speed is 300 Mbps. The measurements we showed that it is preferable to using separate antennas use different pairs of polarization antennas. The new MIMO antenna BOX, DUPLEX JIROSU or AirMAX from UBNT already own 2 antennas have, so just connect using the equipment. Indicates the maximum real rate of about 150 Mbps. We measured a short distance where the max speed of just under 100 Mbps. Detailed we measured the links at around 200 to 600 meters and the speed is always around 75 Mbps full duplex. Detailed measurements on links 2 to 4 km you can see bellow.
Publish Date: 18-10-19
Description: MikroTik's RouterBOARD ceiling AP (cAP-2n) with an AR9331 CPU, 32MB RAM, 1xLAN, built-in 2.4Ghz 802.11b/g/n wireless with integrated antenna, RouterOS L4, plastic case, and PSU is their first 2.4GHz ceiling AP. Inconspicuously manufactured, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc. The cAP2n supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.
Publish Date: 18-10-19
Description: The SuperRange Cardbus adapter is a hi-performance, hi-power FCC-compliant client solution specifically designed for long distance links normally impossible to achieve with standard a/b/g cards. It features excellent receiver performance, external antenna connectors, advanced mobility functionality, as well as Cisco CCX 4.0 support with the latest 802.11 QoS and Security standards. Items are brand new in box. Multiple available.
Publish Date: 12-06-18
Description: The RB750 is a small five port Ethernet router in a nice plastic case. 5 x fast Ethernet ports Use for MPLS bonding up to 4 DSL modems Full RouterOS capabilities - firewall, failover, filtering, QoS, etc... Fully tested and working. Includes wall adapter.
Publish Date: 03-04-17
Description: The SEXTANT is a 18dBi 5GHz antenna with a built in RB911G router. It has two polarizations to give you all benefits of 2x2 MIMO in 802.11n. Inside is the high power RB911 dual chain wireless device, with high performance, high output power, and a Gigabit Ethernet port, to fully utilize the benefit of 802.11n high speed wireless. Easy to use and quick to deploy, SEXTANT is ideal for point to point links. Item is used, but very good cosmetic condition.
Publish Date: 30-03-17
Description: New open box 5GHz dual chain radio 24dBi dual polarity panel antenna 1W (30dBm) output power Gigabit Ethernet port $120USD
Publish Date: 29-03-17